Medela LACTINA Instrucciones Generales página 4

Ocultar thumbs Ver también para LACTINA:
Idiomas disponibles

Idiomas disponibles

If milk appears in tubing:
1. Turn off the pump and unplug from power source.
2. Remove and disassemble the tubing, pump connector,
piston, cylinder and filter (parts vary by pump used).
Except for filter*, wash in soapy water, then rinse in
clear cold water. Clean the filter by rinsing in warm
water without soap.
3. Shake water droplets out of tubing and hang to air-dry.
For faster drying, attach tubing to pump and run pump
1-2 minutes or until dry, or pour a small amount of
isopropyl alcohol through the tubing to dry.
*If using Classic Breastpump parts, DO
NOT USE SOAP, ONLY WATER, TO
CLEAN FILTER. See page 10, #2 for
cleaning instructions.
Care of Piston/Cylinder Assembly:
The inside of the cylinder must be smooth and free of
buildup to ensure long-lasting performance of the rubber
seal. Clean the cylinder, rubber seal, and vacuum regulator
ring every few pumpings with lukewarm soapy water or a
vinegar and water solution to keep these parts working
efficiently. In addition, rotate the piston in the cylinder
every few pumpings to ensure even wear. Only
sterilize/sanitize these parts when the presence of milk is
evident. Be sure the rubber seal is completely dry before
using.
Cylinder
Rubber
Seal
4
Classic
Filter
Piston
Lactina
®
Breastpump Kit Parts
5
1a
1b
3
2
4
11
Item
1a. PersonalFit
Breastshield, Standard (24mm)....................87073
1b. PersonalFit Breastshield Connector ................................87071
1c. Breastshield (1-piece) ..................................................8107089
2.
Valve Assembly (2-Part) ................................................8000001
3.
Valve ............................................................................8100475
4.
Membrane ....................................................................8207013
5.
Pump Connector with Plug ..........................................8000649
6.
Rubber Seal ..................................................................8200078
7.
Piston ............................................................................8100494
8.
Vacuum Regulator Ring ................................................8200066
9.
Cylinder ........................................................................8100717
10. Tubing............................................................................8007179
11. Milk Collection Container..............................................8117009
12. Container Stand ............................................................8100462
13. Solid Lid for Collection Container ................................8107057
14. Instruction Manual
English/Spanish (not shown)
15. Instruction Manual
English/French (not shown)
Call for pricing
Breastpump kits come with either 1-piece breastshields
or PersonalFit Breastshields.
1c
6
7
8
10
13
12
Order Number
......................1547477
........................1547476
9
5
loading

Este manual también es adecuado para:

Classic