Idiomas disponibles
Idiomas disponibles
7. Use upper 2 holes in the RH mounting bracket
as a template to drill 2 holes through inner side
of pickup bed (FIG. 16-1). Then, bolt RH mount-
ing bracket to inner side wall of pickup bed as
shown in FIG. 16-1. Repeat for LH mounting
bracket (FIG. 16-2).
8. Unlatch and unfold platform. Refer
to operation manual if needed. Then,
adjust liftgate position so platform is
level from front to back.
9. Securely tighten bolts fastening RH
mounting bracket to main frame
bracket (FIG. 16-1). Ensure the
split lock washers are not in the
slotted holes on main frame brack-
et. Repeat for LH mounting bracket
(FIG. 16-2).
10. Reinstall taillights (FIGS. 16-1
and 16-2).
LIFT CORPORATION Sht. 16 of 76 DSG#
INSTALLING LIFTGATE - Continued
LOCK WASHER
(2 PLACES)
RH MOUNTING
BRACKET
3/8"-16 X 1" LG
HEX BOLT
BOLTING RH MOUNTING BRACKET
TO PICKUP BED (LIFTGATE NOT SHOWN)
3/8" HEX NUT
(4 PLACES)
3/8"
LOCK WASHER
(4 PLACES)
ALUMINUM
SPACER
(4 PLACES)
DRILL 2 HOLES
THRU INNER
SIDE WALL
LH TAILLIGHT
LH MOUNTING
BRACKET
BOLTING LH MOUNTING BRACKET
TO PICKUP BED (LIFTGATE NOT SHOWN)
M-24-01
Rev. - Date: 05/07/24
3/8" HEX NUT
(2 PLACES)
3/8"
FIG. 16-1
(3 PLACES)
FIG. 16-2
ALUMINUM
SPACERS
DRILL 2 HOLES
THRU INNER
SIDE WALL
TAILLIGHT
DRILL 2 HOLES
THRU INNER
SIDE WALL
3/8"-16 X
2-1/2" LG
HEX BOLT
