Idiomas disponibles
Idiomas disponibles
1. Position angle brackets (Kit item) fl ush
with RH and LH side of rear opening in the
pickup bed, where corner posts meet the
fl oor (FIG. 13-1).
2. Remove taillights (FIG. 13-1).
CAUTION
Before drilling holes in the pickup
bed, ensure there are no obstruc-
tions to drill bit or items that could
be damaged.
3. Use RH angle bracket as a template
to drill holes, for 3/8"-16 screws, in the
fl oor and corner post of pickup bed
(FIG. 13-1). Repeat for angle bracket
on LH side of pickup bed.
4. Bolt angle brackets and spacers to
pickup bed with 3/8"-16 screws, 3/8" fl at
washers, and 3/8"-16 nuts (FIG. 13-1).
Repeat for angle bracket on LH side of
pickup bed (FIG. 13-2).
LIFT CORPORATION Sht. 13 of 76 DSG#
INSTALLING ANGLE BRACKETS
M-24-01
3/8"-16 X 1" LG
BUTTON HEAD SCREWS
ANGLE
BRACKET
3/8"
LOCK WASHER
(2 PLACES)
3/8"-16 NUT
(2 PLACES)
BOLTING ANGLE BRACKETS & SPACERS
TO RH SIDE OF PICKUP BED
LH TAILLIGHT
ALUMINUM
SPACERS
(AS REQUIRED)
EDGES FLUSH
WITH REAR
OPENING
3/8"
LOCK WASHER
(2 PLACES)
3/8"-16 NUT
(2 PLACES)
BOLTING ANGLE BRACKETS & SPACERS
TO LH SIDE OF PICKUP BED
Rev. - Date: 05/07/24
RH TAILLIGHT
ALUMINUM
SPACERS
(AS REQUIRED)
EDGES FLUSH
WITH REAR
OPENING
ALUMINUM
SPACERS
(AS REQUIRED)
FIG. 13-1
PRO POWER
PANEL
3/8"-16 X 1" LG
BUTTON
HEAD SCREW
ALUMINUM
SPACERS
(AS REQUIRED)
FIG. 13-2
