Idiomas disponibles
Idiomas disponibles
˜ Checking the battery pack
charging level
(Fig . B)
Check battery pack charge level: Press the
o
[
13 ]
button
. The charging level LEDs
light up:
[
14 ]
LED
Red/orange/green
Red/orange
Red
˜ Charging the battery pack
(Fig . C)
NOTE
u
The battery pack
any time without reducing the life .
u
Interrupting the charging process does not
damage the battery pack
o
Charge the battery pack
when it is at medium or low charging level .
o
The charging control LEDs (green
18 ]
[
red
) indicate the status of the charger
and the battery pack
LED
Red LED lights up
Green LED lights up
Green and red LED
flashing
Red LED flashing
Green LED lights up
(without battery pack)
1 . Insert the battery pack
15 ]
[
charger
.
2 . Connect the power cord with power plug
[
15 ]
of the charger
to the socket .
[
14 ]
Charging level
Maximum
Medium
Low
[
10 ]
may be charged at
[
10 ]
.
10 ]
[
before operation
[
17 ]
and
10 ]
[
:
Status
Battery pack charges
Battery pack fully
charged
Battery pack defective
Battery pack too cold
or too warm
Charger ready
[
10 ]
into the
3 . When the battery pack
charged: Remove the battery pack from
the charger
[
16 ]
plug
of the charger from the socket .
˜ Attaching/removing the
accessory tool
m
CAUTION! Risk of injury!
Accessory tools can be sharp and
may become hot during use . Always
wear protective gloves when handling
accessory tools!
m
WARNING!
Always switch the product off, remove
the battery pack
product cool down before making any
adjustments!
m
CAUTION! Risk of injury!
u
Keep your hands away from the accessory
tool when the product is in operation .
u
After the product has been switched off, the
accessory tool continues moving for some
15 ]
[
time . Do not touch the accessory tool and
do not attempt to brake it .
This product is equipped with an automatic
spindle lock to open or close the chuck
[
2 ]
the chuck ring
1 . Open the chuck
a counter-clockwise direction (Fig . E) .
2 . Insert a suitable accessory tool into the
[
1 ]
chuck
as deep as required .
3 . Close the chuck
tool in position . Turn the chuck ring
clockwise direction .
NOTE
[
16 ]
u
This product is equipped with a Röhm drill
chuck with an anti-lock function .
10 ]
[
is fully
15 ]
[
. Then disconnect the power
10 ]
[
and let the
.
1 ]
[
: Turn the chuck ring
1 ]
[
: Hold the accessory
GB/IE
1 ]
[
with
2 ]
[
in
2 ]
[
in a
33
