EGO HTX5310-P Manual Del Operador página 38

PROBLEM CAUSE
◾
◾
Excessive
vibration or
◾
noise.
◾
38
56-VOLT LITHIUM-ION COMMERCIAL 21" EXTENDED POLE HEDGE TRIMMER — HTX5310-P/HTX5310-P-FC
Dry or corroded blades.
Blade or blade support is bent.
Bent or damaged teeth.
Loose blade bolts.
SOLUTION
◾
Lubricate the blades, following the
instructions in the "LUBRICATING THE
BLADES" section in this manual.
◾
Replace with a new blade or support.
Contact EGO service center for blade or
support replacement.
◾
Replace with a new blade. Contact EGO
service center for blade replacement.
◾
Tighten the blade bolts. Use an adjustable
wrench and the included hex key to
tighten the blade bolts clockwise.