Service Menu - salmson LRE Serie Instrucciones De Montaje Y Puesta En Servicio

ENGLISH
Double pump mode: Menu order during standard use:
After switching on the module,
display the same menu sequence
5
The display returns to the basic setting
In the event of a fault, the fault menu

7.4.3 Service menu

The service menu is used for all settings other than the standard settings.
Pressing the acknowledge button" for more than 6 seconds activates the service menu.
> 6 sec The displays can be scrolled in sequence (see annex). At the end of the sequence the status display re-appe-
ars. After 30 seconds without any input the status display also re-appears and all temporary, unacknowledged
changes
6
X
all symbols 1 . appear on the display for 2 s. Next, the current setting
X X
... appears as with the single pump. Next, menu
2 4
LC-display
X
18
are rejected.
LC display
Setting addition or main/reserve mode.
The current setting blinks.
Setting the mode:
Press button. The new setting blinks.
Press acknowledge button to store the new setting.
X
.
2
is displayed instead of the basic setting
Display orientation
The display shows the current display orientation "Lcd" (factory setting = shaft
in horizontal position):
Setting the display orientation
Press button. The new setting blinks.
Press acknowledge button to store the new setting.
40
X
is set. When "scrolling" in the MA
2
X
appears.
5
Setting
X
.
2
Setting