Siemens SIMOVERT MASTERDRIVES Instrucciones De Servicio página 43

10.1999
X1 input
X2 output
NOTE
Siemens AG 6SE7087-8NP87-0FB0
SIMOVERT MASTERDRIVES
The terminal is on the bottom of the unit. It is for connecting the radio-
interference filter to the power supply voltage.
Terminal Significance
PE Protective conductor terminal
L3 Phase L3
L2 Phase L2
L1 Phase L1
Connectable cross-section: 4 mm² (AWG 10)
Terminal PE is at the front when unit has been installed.
Table 5-1 Terminal X1: input of the radio-interference filter
The terminal is on the top of the unit. It is for connecting the radio-
interference filter to the connected converter.
Terminal Significance
L1'
L2'
L3'
PE Protective conductor terminal
Connectable cross-section: 4 mm² (AWG 10)
Terminal PE is at the front when unit has been installed.
Table 5-2 Terminal X2: output of the radio-interference suppression filter
Please ensure that the cable from the supply system to the filter input
and the output cables of the converter are laid separately from each
other.
Operating Instructions
3AC 380 V - 480 V
3AC 380 V - 480 V
3AC 380 V - 480 V
3AC 380 V - 480 V
Phase L1' 3AC 380 V - 480 V
Phase L2' 3AC 380 V - 480 V
Phase L3' 3AC 380 V - 480 V
3AC 380 V - 480 V
Connecting-up
Range
Range
5-3