Idiomas disponibles
Idiomas disponibles
No lubrication is necessary as the motor is equipped with lifetime lubricated bearings.
Before storing your vacuum the tank should be emptied and cleaned. The power
cord can be wrapped around the cord wraps provided on the tank cover on front
of vacuum. The hose may be wrapped around the wall bracket and the accessories
stored in the tool bag so they can be readily available. Never allow liquids to sit in
the tank for any extended period of time. The vacuum should be stored indoors.
Do not attempt to service your Shop-Vac
Refer all other servicing to a qualified service center.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSES
Parts/accessories
1. Packed in tank
missing
Vacuum cleaner
1. No power at receptacle
will not start
2. Defective switch
3. Defective motor
Dust discharging
1. Filter not installed/not installed
from exhaust
properly
2. Filter damaged
3. Filter clogged or dust is too fine 3. Use more efficient filter
4. Filter not functional
Loss of suction
1. Loose hose connection
2. Filter clogged
3. Full tank
4. Hole in hose
Static shock
1. Dry environment
2. Relative humidity of air is low
LUBRICATION
STORAGE
SERVICE
wet/dry vacuum cleaner beyond that described in this manual.
®
SOLUTION
1. Check in tank
1. Check for power
2. Contact Shop-Vac
3. Contact Shop-Vac
1. Properly install filter
2. Replace filter
4. Clean or replace filter
1. Tighten hose connection
2. Clean or replace filter
3. Empty tank
4. Replace hose
1. Add moisture to air (if
2. This situation is temporary
®
customer service
®
customer service
practical, use a console
or installed humidifier).
and does not affect the use
of the vacuum cleaner.
PAGE 9
