Idiomas disponibles
Idiomas disponibles
CORDLESS DRILL DRIVER 12 V
PBSPA 12 D4
Introduction
Congratulations on the purchase of your new
appliance. You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product,
please familiarise yourself with all instructions re-
garding safety and use. Use the product only as
described and for the specified range of applica-
tions. Please also pass on all documents to any
future owner.
Intended use
This appliance is designed for screwing and drilling
into wood, plastic and metal. The appliance may
only be used as described and for the specified
application areas. Any other usage of or modifica-
tion to the appliance is deemed to be improper
and carries a significant risk of accidents. The
manufacturer accepts no responsibility for damage
caused by incorrect use of the appliance. This
appliance is not intended for commercial use.
Features
1 Speed selector
2 Rotational direction switch/lock
3 Battery LED (charge level indicator)
4 Soft grip
5 Release button for the battery pack
6 Battery pack
7 ON/OFF switch
8 LED work light
9 Quick-release chuck
0 Chuck ring
q Bit adapter
w Torque selection ring/drill setting
Figure A
e Charger
r Green charge indicator LED
t Red charge indicator LED
2
GB │ IE
│
■
Figure B
z Bits
u Metal drill bits
i Wood drill bits
o Carrying case
Package contents
1 cordless drill driver 12 V
2 battery packs
1 high-speed charger
25 bits (including 1 bit holder)
7 metal drill bits (2/3/4/5/6/7/8 mm)
7 wood drill bits (3/4/5/6/7/8/10 mm)
1 carrying case
1 set of operating instructions
Technical data
Cordless drill driver 12 V PBSPA 12 D4
Rated voltage
Gearbox
Rated idle speed
Max. torque
Torque stages
Chuck clamping width
Max. drill diameter
Battery pack PAPK 12 A3
Type
Rated voltage
Cells
Capacity
High-speed battery charger PLGK 12 A3
INPUT
Rated voltage
Rated power
consumption
Fuse (internal)
12 V
(DC)
2-speed gearbox
1st gear: n
0–460 rpm
0
2nd gear: n
0–1750 rpm
0
35 Nm
1–20 + 1 drill setting
max. Ø 10 mm
Steel 10 mm
Wood 19 mm
LITHIUM ION
12 V
(DC)
3
2000 mAh (24 Wh)
220–240 V ~ , 50–60 Hz
(AC)
50 W
T2A
2,4 A
PBSPA 12 D4
