Parkside PASSK 20-Li B2 Traduccion Del Manual De Instrucciones Originales página 25

tery or the battery-powered
tool outside the temperature
range stated in the operating
instructions. Incorrect charging or
charging outside the permitted tem-
perature range may destroy the battery
and increase the risk of fi re.
6) SERVICE
a) Have your power tool serviced
by a qualifi ed repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
b) Never repair damaged batter-
ies. All battery repairs should be car-
ried out by the manufacturer or author-
ised customer service centres only.
Further safety directions
a) Hold the power tool by the
insulated handle grips when
performing work in which the
screw may come into contact
with hidden wiring or its own
power cord. If the screw were to
come into contact with a live electrical
cable, metal parts of the appliance
could also become live and cause an
electric shock.
b) Keep hands away from rotating
parts. Wait until the power tool
has stopped before placing it
down. Risk of injury!
c) Avoid contact with the tool insert
or the component part immedi-
ately after processing. The parts
may be hot and cause burn injuries.
d) Immediately switch off the
power tool if the tool insert is
blocked due to overloading or
tilting of the component part.
The loss of control can result in injuries.
e) Secure the workpiece. A workpiece
that is retained with clamping appli-
ances or a vice is held more securely
than with your hand.
f) In case of soft materials such as
aluminium or similar, using the
impact wrench can damage the
thread or screw seat if screwed
too tight.
g) Protect yourself and others,
including people in the immedi-
ate vicinity, with the necessary
safety measures or precautions
to prevent damage to health.
h) Do not use any accessories
that are not recommended by
PARKSIDE. This can result in electric
shock or fi re.
Observe the safety informati-
on and notes on charging and
proper use as shown in the in-
struction manual for your bat-
tery and charger from the
( Parkside) X 20 V TEAM series.
A detailed description of the
charging process and further
information can be found in
the separate operating instruc-
tions.
Residual risks
Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this electric
tool may present the following hazards:
a) Injuries caused by moving parts or hot
surfaces.
b) Ear damage if working without ear pro-
tection.
GB MT
25