Idiomas disponibles
Idiomas disponibles
Installation
50", 54" & 60" Fabricated Deck Striper Kit - Model
19A70059OEM
Model 19A70059OEM striper kit is designed for use with
select Residential Zero Turn (RZT) mowers. Refer to your RZT's
Operator's Manual to assure compatibility.
Carton Contents - Model 19A70059OEM
Before beginning installation, remove all parts from the carton
to make sure everything is present. Carton contents are listed
below. Part numbers are shown in parentheses. See Figure 1-1.
1.
Three Roller Support Brackets (703-08454)
2.
Six Screws, 3/8-16 x .750 (710-0623)
3.
One Roller Pin (711-05664)
4.
One Lock Nut, 1/2-13 (712-3083)
5.
Four Rollers (731-05679B)
5
Figure 1-1
3
2
1
50", 54" & 60" Fabricated Deck Striper Kit
Installation - Model 19A70059OEM
To install the Striper Kit on tractors equipped with a 50", 54" or
60" fabricated deck proceed as follows:
1.
Install three Roller Support Brackets (#1) to the locations
shown in Figure 1-2 on the Tractors deck with two 3/8 Self-
Tapping Screws (#2) per bracket. See Figure 1-2.
Figure 1-2
2.
Align the rollers (#5) inside the brackets (2 per set of
brackets) and slide the Roller Pin (#3) through the center of
the rollers and into the mounting hole of the right handed
Roller Bracket. See Figure 1-3.
3.
Secure the end of the Roller Pin with a 1/2 Lock Nut (#4). See
Figure 1-3.
Figure 1-3
2
3
