Bushnell TROPHY CAM HD ESSENTIAL Manual De Instrucciones página 32

Camera won't retain settings
Make sure that you have been saving the changes to any parameter
settings that you made while in Setup mode, by pressing "OK" after
changing the setting. If you don't save your new setting after changing
it, the camera will continue to use the original default setting for that
parameter.
Field Scan (Time Lapse) not working properly
1. Make sure that the stop and start times of Field Scan "A" and "B" do
not overlap (for example, do not set the start time of "B" to 8AM if the
stop time of "A" is 10AM).
2. When using Field Scan in video mode, the smallest interval time
available is 5 min, to avoid potential overheating of the batteries and
electronic components, which could cause operational failure or
damage to the camera. In still photo mode, a 1 min. Interval can be set.
CAUTION!: DO NOT USE the 1s Interval setting for Video
at night at a feeder or similar environment. It may cause
the LEDs to continue firing over a long period of time,
which may overheat and shorten the operating life of the
internal electronic components.
Do not mix battery types-use ALL lithium or ALL alkaline.
Rechargeable batteries are not recommended.
32
Do not mix old and new batteries.