Bushnell TROPHY CAM HD ESSENTIAL Manual De Instrucciones página 20

Parameter
Video Length
(only affects
video clips)
Interval
20
Settings
(Bold=default)
10S (second)
default, with 60S
to 5S possible
range (15S max.
for video at night)
10S (second)
default, with a
60M (minute)
to 1S (second)
range of settings
available.
(60M-1M are set
in one minute
increments,
59S-1S are set
in one second
increments)
Description
Sets length per captured video
clip. Settings begin with 10 second
default when parameter is first
selected. After stepping down to
5S, video length settings start over
at 60S.
Selects the length of time that the
camera will "wait" until it responds to
any additional triggers from the PIR
after an animal is first detected and
remains within the sensor's range.
During this user set "ignore triggers"
interval, the camera will not capture
photos/videos. This prevents the
card from filling up with too many
redundant images. Settings begin
with the default 10 seconds when
parameter is first selected.
Notes: after setting down past "1S",
settings start over at "60M".
Setting the Interval time to 1
second will capture the maximum
# of images, but some may appear
"washed out" if animal is too close to
camera at night.