GE JKP30 Manual Del Propietário página 24

Horno de pared, electrico empotrado
Ocultar thumbs Ver también para JKP30:
Idiomas disponibles

Idiomas disponibles

Care and cleaning of the oven.
IA WARNING
IA CAUTION
Receptacle
. Socket
L
G&35Buie
onsome mooets
Receetacle
Socket
_GgBulb
(onsomemodels
I
HOCKORBURNHAZARD.Before replacing oven light bulb, dbconnect the electrbal
power to the oven at the main fuse or circuit breaker panel. Failure to do so may result
b electric shock or bum.
BURN HAZARD. Theglass cover and bulb should be removed when cool. Touchinghot glass
with bare hands or a damp cloth can cause bums.
Oven Light Replacement
TOremove:
[_]
Turn
the
glass
cover
counterclockwise
1l/4 turn
until
tile tabs
of the
gl_L_s cover
clear
the
grooves
of tile socket°
Wearing
latex
gloves may ofi:e.r a better
g_Jp.
[_
Using gloves or a (hT cloth, remove
the bulb by pulling
it straight
out.
Toreplace:
[_
Use a new 120/130-volt
halogen
bulb, not to exceed
50 watts.
Replace
die bulb widl die same
type of bulb flint was removed.
Your
model will have one of the ta, v o types
shown on the left To determine
the
correct
replacement
bulb, check the
bulb terlninals.
Bulbs with 2 straight
pin mmflna/s
are 06.35
bulbs° Bulbs
with 2 looped
mmflna/s
are (;9
bulbs. (DO not interchange.)Be
sure
the replacement
bulb is mind
120
volts or 130 volts (NOT
12 volts).
Using gloves or a (hT cloth, remove
the bulb flom its packaging.
Do not
touch the bulb with bare finge_s. Oil
flom skin will damage
the bulb and
shorten
its life..
%
[]
Push the bulb straight into the
receptacle all the way.
Place the robs of the glass cover into
the grooves of the socket. Turn the
gl_ss cover clockwise 1l/4 turn.
For improved
lighdng
inside
die oven, clean the glass cover
flequen@
using a wet cloth. This
should
be done
when the oven is
complemly
cool.
[]
Reconnect
electrical
power to
the oven°
I
I
x
,
,
i
i _ i
i ,_1/,n,
_
,
JMaximurn (
'_,
IIeng th
_:
Glass c over
Oven Light Bulb (on somemodels)
Toremove:
Turn the glass cover counterclockwise
1/4 mrn until the tabs of the glass cover
clear the grooves
of the socket.
Remove
the bulb.
Toreplace:
Put in a new 40-watt appliance bulb.
Place the robs of the gl_tsscover into
the grooves of the socket. Turn the glass
cover clockwise 1l/4 turn.
NOTE:
A 40-wattappliance bulbis smaller than
a standard 40-watthousehold bulb.
Installandtightenthecoverclockwise.
Reconnect electrica/ p owerto theoven.
Forimproved lightinginsidetheoven, c lean
theglasscoverfrequently usinga wet cloth.
This shouldbe donewhentheovenis
completely c ool.
24
loading