Light Bulb Replacement; Power Interruptions; Vacation And Moving Care - GE PVM1790 Instrucciones De Instalación

Ocultar thumbs Ver también para PVM1790:
Tabla de contenido

Light Bulb Replacement

1. Switch off power to refrigerator.
2. Remove the highest shelf.
3. Allow light bulb to cool before removing.
4. Pinch the plastic cover between fingers and
thumb and gently pull to the left.
5. Remove the bulb by screwing it counter-clockwise.
6. Always replace with appliance-type light bulb rated at 15 watts
or lesser wattage.
Caution:
7.
8. To replace cover, insert rear clips in first and gently push front
clip in until the cover snaps into place.

Power Interruptions

• Occasionally there may be power interruptions due to
thunderstorms or other causes. Remove the power cord from AC outlet
when a power outage occurs. When power has been restored, replug
power cord to AC outlet. If outage is for a prolonged period, inspect
and discard spoiled or thawed food in freezer and refrigerator. Clean
refrigerator before reusing.

Vacation and Moving Care

• For long vacations or absences, empty food from refrigerator and
freezer, move the temperature to the OFF position and clean the
refrigerator and door gaskets according to "General cleaning"
section. Prop doors open, so air can circulate inside.When moving
always move the refrigerator vertically. Do not move with the unit lying
down. Possible damage to the sealed system could occur.
WARNING: IF OUTAGE IS FOR A PROLONGED PERIOD, INSPECT
Do not exceed the 15 watts rating at any time.
AND DISCARD SPOILED OR THAWED FOOD IN
FREEZER. CLEAN FREEZER BEFORE REUSING.
English
14

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Cvm1790

Tabla de contenido