Reassemble The Machine And Lubricate Components - Vollrath Stoelting Manual Del Operador

REASSEMBLE THE MACHINE AND LUBRICATE COMPONENTS

All parts should be cleaned, sanitized and allowed to air dry before
assembling.
NOTICE: Total Blend, Petrol-Gel or equivalent food safe lubricant
must be used when lubrication of machine parts is
specified.
NOTICE: The United States Department of Agriculture and the Food
and Drug Administration require that lubricants used on
food processing equipment be certified for this use. Use
lubricants only in accordance with the manufacturer's
instructions.
1. Turn off and unplug the machine.
2. Press the gear into the bottom of the vertical drive shaft. Lubricate
the gear teeth with food safe lubricant.
3. Insert the drive shaft into the machine and secure it with the
fastening nut.
4. Press the gear onto the back of the auger. Lubricate the gear teeth
with food safe lubricant.
Lubricate
5. Install the auger into the machine
8
6. Lubricate the front of the auger with food safe lubricant.
7. Install the gasket into the groove on the bottom of the tank. Make
sure the joint of the gasket is placed on one of the rear corners of the
tank.
Lubricate
8. Install the tank onto the machine and secure it with the clamps.
Screw the fastening knobs into the clamps.
9. Install the rosette cap.
10.Install the o-rings onto the spigot assembly and apply a thin film of
food safe lubricant to the o-rings.
11.Install the spigot assembly.
12.Secure the pivot arms to the spigot.
NOTICE: Attach both pivot arms onto the handle knobs at the same
®
Stoelting Mini Soft Serve Countertop Freezer Operator's Manual
Lubricate
time to prevent the arms from twisting and breaking.