Idiomas disponibles
Idiomas disponibles
4.1 Button Functions
4.1.1 Data Hold
■ The last reading may be held on the display by pressing
the HOLD button. The
data hold mode.
■ When the held data is no longer needed, release the
hold function by pressing the HOLD button again.
4.1.2 Peak Hold Function
■ This meter is built with 1 ms peak hold function on A
V
, A
and V
AC
DC
■ Calibration is necessary before performing a peak hold
operation.
■ To start the calibration process, press and hold the PEAK
button for 2 seconds. CAL will display on the LCD and the
offset will be calculated and kept in the meter.
■ After calibration, choose either
Peak Hold button to keep the peak reading.
■ Pressing the PEAK button for 2 seconds will return the
meter back to normal operation.
■ Once the function range is changed, the meter will need
another calibration for peak measurement.
4.1.3 MAX/MIN Function
■ This meter is built with MAX/MIN function at A
A
and V
DC
■ Pressing the MAX/MIN button once will set the meter to
MAX mode.
■ Pressing it twice will set the meter to MIN mode.
■ Pressing it three times will display the present reading
and still keep track of the MAX and MIN change. This
mode will also indicate a blinking MAX/MIN symbol.
■ Pressing the MAX/MIN button for more than 2 seconds
will set the meter back to normal operation.
Clamp-On Meter Model 514 - User Manual
4. OPERATION
ranges.
DC
ranges.
DC
symbol will be displayed in
or
,
AC
by pressing the
, V
,
AC
AC
15
