Melchioni Family MF 2119BLS Manual De Instrucciones página 9

4. Press "SPEED" to select the fan speed level: Ⅰ (Low), Ⅱ (Medium), Ⅲ (High). Press "MODE" on the control
panel or remote control to select the ventilation mode: normal, natural or night. To stop ventilation, simply
press the "ON / OFF" button.
5. Press "OSC" or "SWING" button on the remote control, and the fan will start swinging. To stop oscillation,
press the OSC or SWING button again.
6. Press the TIMER button to choose the desired operating time. Once reached, the device will automatically
stop working.
7. To completely turn off the appliance, turn all the controls to the "ON / OFF" position, then remove the plug
from the socket.
CONTROL PANEL
REMOTE CONTROL
REMOTE CONTROL BATTERIES
The remote control is supplied without batteries; before use, open the battery compartment on the back of
the remote control and insert two LR03 1.5V AAA batteries, respecting the indicated polarity.
To remove the batteries, open the battery compartment on the back of the remote control, sliding the cover
outwards.
1. Swing: To enable or disable automatic swing
2. Timer (15 hours): press repeatedly to choose the desired operating
time. Once reached, the device will automatically stop working.
3. ON / OFF: to turn the fan on or off
4. Speed: to select the desired airflow speed - Low - Medium - High
5. Mode: to select the type of strong, natural or night air flow
IMPORTANT: Always turn off the appliance and unplug it when not in
use.
1. ON / OFF: Press this button to turn the fan on or off.
2. Swing: By pressing this button, you can activate the swing function. This mode
will not be activated when the fan is off or the timer is set to OFF.
3. Fan Speed: To select the desired airflow speed - Low - Medium - High
4. Timer: By repeatedly pressing this button you can set the sleep timer from 1 to
15 hours.
5. Wind Type (Mode): press the button to choose the type of air flow: natural, strong
ventilation or night.
• The remote control can be used with a range of about 8m from the receiver (the
reception is placed inside the main body of the fan)
• Do not place anything between the fan and the remote control to allow the remote
control to work properly.