Idiomas disponibles
Idiomas disponibles
MF 2119BLS
INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the
following:
1.
The appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning the use of the appliance by a person responsible for their safety.
2.
Children has not to play with the appliance. Cleaning and user maintenance shall not be made by
children without supervision.
3.
Use fan only for intended use, as described in instruction manual.
4.
To protect against electrical shock, do not immerse unit, plug, or cord in water or spray with liquids.
5.
Close supervision is necessary when any appliance is used by or near children.
6.
Unplug from outlet when not in use, when moving fan from one location to another, before putting on
or taking off parts and before cleaning.
7.
Never insert fingers, pencils or any other objects through the grille when fan is running.
8.
Disconnect fan before cleaning.
9.
Make sure fan is on a stable surface when operating to avoid chance of overturning.
10. Do not use fan in a window. Rain may cause an electrical hazard.
11. Do not operate in the presence of explosive and/or flammable fumes.
12. Do not place fan or any parts near an open flame, cooking or other heating appliances.
13. Do not operate any appliance with a damaged cord or plug, after the appliance malfunctions or has
been dropped or damaged in any manner.
14. Do not let cord hang over table or counter or touch hot surfaces.
15. To disconnect, grip plug and pull from wall outlet. Never yank on cord.
16. Always use on a dry surface.
17. This product is intended for household use only and not for commercial or industrial use.
18. Do not use fan near curtains, plants, window treatments, etc.
19. During the first few minutes of initial use, a slight odor may be noticeable. This is normal and will
quickly disappear.
POWER CORD SAFETY TIPS
1)
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
2)
Never pull or yank on the cord or the appliance.
3)
To insert plug, grasp it firmly and guide it into outlet.
4)
To disconnect appliance, grasp plug and remove it from outlet.
5)
Before each use, inspect the power cord for cuts and/or abrasion marks. If any are found, this indicates
that the appliance should be serviced and the power cord replaced. Please return it to our Service
Department or to an authorized service representative.
6)
Never wrap the cord tightly around the appliance, as this could cause the appliance to fray and break.
7)
Do not operate appliance if the power cord shows any damage, or works intermittently and stops
working.
English
