Replacing The Battery - Sonel CMM-60 Manual De Uso

CMM-60 is powered from a battery pack of 7.4 V 2400 mAh.
While performing the measurements with the battery discharged, the user must be aware of
additional unspecified uncertainties or unstable operation of the device.
If the test leads are left in the terminals during replacement of the battery, they may generate a
risk of electric shock.
To replace the battery:
 remove test leads from the terminals of the meter.
 set the rotational function selector at OFF,
 deflect the leg and unscrew 4 screws fixing the compartment cover,
 remove the cover,
 remove the battery pack and insert a new one, observing the polarity,
 put on the cover and tighten the fixing screws.
To avoid electric shock, do not use the meter if the battery compartment cover is not in place
or is not properly fastened.
If the meter does not work properly, check the fuses and the battery pack in order to ensure
that they are in proper condition and properly installed in the device.
64
8

Replacing the battery

WARNING:
WARNING:
Leg
CMM-60 – USER MANUAL
Note:
Battery cover
Li-Pol battery
pack 7.4 V
Note: