Menu Panel; Max/Min Function; Hold Function; Range Function - Sonel CMM-60 Manual De Uso

5.4 MENU panel

 F1 (MENU) 

F1 F2 F3 F4 selection of measurement parameters
Details: section 7.1
5.5

MAX/MIN function

MAX/MIN button – turn on the function
F4 (STOP)  F4 (CLOSE) – turn off the function
The function displays three values:

Minimum recorded value of the amplitude,

Average of all recorded values,

Maximum recorded value of the amplitude.
Details: section 7.3
Note: when the meter switches off automatically and then it is restarted with ESC button, data
on the screen will be lost.
5.6

HOLD function

HOLD – the upper bar of the display shows the current measured signal
AutoHold – monitors the input signal. Updates stopped read-out, when the meter detects a new sta-
ble value of the signal

HOLD button - on/off

F1 (AUTOHOLD)

F1 (CANCEL) – disable AutoHold

F4 (CLOSE) – enable HOLD/AutoHold
Details: section 7.4
Note: when the meter switches off automatically and then it is restarted with ESC button, data
on the screen will be lost.
5.7

RANGE function

RANGE button enables the manual change of the measurement range.

RANGE – enable the manual change of ranges.

RANGE – switches measurement ranges in the loop

RANGE (hold for 2 s) – disable the function
Details: section 7.5
selection of the measuring mode
CMM-60 – USER MANUAL
49