Meter Info; Instrument; Calibration; Wireless Communication - Sonel CMM-60 Manual De Uso

7.7.2 Meter Info

This function displays information about the interface version and firmware of the meter with address
of the manufacturer:

use F4 button to select SETUP,

use arrows and F1 F2 F3 F4 buttons to select Meter Info.

7.7.3 Instrument

This function allows user to change the following settings:

the threshold for detecting events for AutoHold function,

the threshold for detecting events for recording measurements,

font colour on the measurement screen,

background colour of the measurement screen.
To change the settings:

use F4 button to select SETUP,

use arrows and F1 F2 F3 F4 buttons to select Instrument,

functions of buttons:
 arrows ▲▼:
- selecting parameter for editing
- changing value of the edited parameter (only in EDIT mode)
 EDIT
- editing,
 OK
- confirms selection,
 CANCEL - rejects selection,
 CLOSE - closes menu.

7.7.4 Calibration

Meter calibration shall be performed by the Manufacturer. For more information, please consult by
phone or e-mail.

7.7.5 Wireless communication

The multimeter is equipped with a Bluetooth wireless data transfer mode for devices with installed
Sonel Multimeter Mobile software. In order to enable / disable the transmission:

use F4 button to select SETUP,

use arrows and F1 F2 F3 F4 buttons to select Communicate,

to turn off Bluetooth; when asked "Turn off Bluetooth?" select OK (CANCEL cancels the selec-
tion),

to turn on Bluetooth; when asked "Turn on Bluetooth?" select OK (CANCEL cancels the selec-
tion),
The activity of this mode is indicated by icon
ible in the Bluetooth manager of any receiver device as CMM-60.
Details of cooperation with the analytical application are provided in Sonel Multimeter Mobile
manual.
62
on the top bar of the display. The meter will be vis-
CMM-60 – USER MANUAL