AquaTru ATU100 Manual Del Propietário página 7

Cold Tap Water Adaptor
ST EP
2
Before mounting onto the tap water line, connect the white tubing to the end of the adaptor and then
install the adaptor.
has a 1/2" conversion thread. Please use the appropriate adaptor size based on your plumbing needs.
After connecting the white tubing to the cold tap water adaptor, give it a pull to make sure it is secure on
the adaptor. Wrap the cold water line shutoff valve with plumber's tape and then wrap the male thread
on the cold tap water adaptor with plumber's tape.
First, install the adaptor to the cold water valve, then install the faucet connector hose to the adaptor.
1.
2.
3.
Under Sink / Instructions
The AquaTru Under Sink RO system comes with comes with a 3/8" adaptor that
Connect tubing
Tubing should
be snug on fitting
Tighten nut with a wrench
(don't over tighten)
to fitting
Water outlet
Water inlet
1/4" Interface
First, connect the PE pipe
Second, connect to the
water purifier
To the
water
purifier
Tap water adaptor valve
6