AquaTru ATU100 Manual Del Propietário página 6

Cold Tap Water Adaptor
ST EP
2
WARNING
The water supply to the unit MUST be from
the cold water line. Hot water will severely
damage your RO system.
Locate the cold water valve underneath the sink, and
turn it off. Next, open the cold water handle on your
sink to release the pressure. Check to make sure the
water has stopped flowing before proceeding.
Note:
On single handle faucets, the hot water may
have to be turned off to prevent hot water crossover
during installation. If water continues to come out of
the faucet with the cold and hot water valve turned
off, the main water supply must be turned off as well.
If the valve does not fit on the cold water shut off
valve, a second option is to install the valve on the
end of the faucet connector hose that connects with
the kitchen faucet.
1/2"
3/8"
1/2"
5
Under Sink / Instructions
Tap water
adaptor
Note: The AquaTru Under Sink RO System
comes with a 3/8" cold tap water adaptor
that has a 1/2" conversion thread. Based on
your plumbing needs, you may need to use
the additional conversion thread.
Faucet
connector
hose
Tap water
adaptor valve
Cold water
shutoff valve