Idiomas disponibles
Idiomas disponibles
English
WARNING
● To avoid injury from an accidental start, turn the switch OFF and pull out the battery from the power
source or remove the battery from the main body before making any adjustments.
● All electrical or mechanical repairs should be done only by qualified service technicians. Contact
metabo HPT Authorized Service Center.
Compressor does not run:
–
Is the battery empty? Charge the battery before use.
–
Check to ensure the battery has been pushed in until it clicks into place.
–
Switch on ignition or vehicle engine when using as a power source.
Tool overheated, e.g. due to insufficient cooling (ventilation grate covered).
–
switch machine OFF;
–
In High-Pressure mode, the product can be operated continuously for a maximum of 5 minutes. After using the
product for 5 minutes, stop using it for 10 minutes and allow it to cool.
–
Switch the tool on again.
Object to be inflated does not receive sufficient pressure.
–
Set the required pressure in the display by pressing the +/- button.
–
Check the hose connection. Has the appropriate adapter been selected?
20
TROUBLESHOOTING GUIDE
