Idiomas disponibles
Idiomas disponibles
English
How to make the batteries perform longer
(1) Recharge the batteries before they become
completely exhausted.
When you feel that the power of the tool becomes
weaker, stop using the tool and recharge its battery. If
you continue to use the tool and exhaust the electric
current, the battery may be damaged and its life will
become shorter.
(2) Avoid recharging at high temperatures.
A rechargeable battery will be hot immediately after
use. If such a battery is recharged immediately after
use, its internal chemical substance will deteriorate,
and the battery life will be shortened. Leave the
battery and recharge it after it has cooled for a while.
BEFORE USE
WARNING
Check for damage prior to commissioning. A
damaged tool, hoses and accessories may not
be put into operation.
1. Setting up
–
Set up on a firm, horizontal and level surface.
–
The operating elements have to be easily accessible
at any time.
–
Position in a dry area protected from frost.
POWER SUPPLY WITH 12 V CIGARETTE
LIGHTER CONNECTION
WARNING
● Do not use this product with power supply from
a 12 V cigarette lighter while the vehicle is
driving.
● Before commissioning, check that the rated
mains voltage, as stated on the type plate match
your power supply.
● Ensure that the 12 V DC adapter is not pinched
or damaged.
14
CAUTION
● Risk of Fire. Do not replace any vehicle fuse with
a rating higher than recommended by the vehicle
manufacturer. This product is rated to draw
10 amperes from a 12 V vehicle outlet. Ensure
that the electrical system in your vehicle can
supply this product without causing the vehicle
fusing to open.
This can be determined by making sure the fuse
in the vehicle which protects the outlet is rated
higher than 10 amperes. Information on the
vehicle fuse ratings are typically found in the
vehicle operator's manual. If a vehicle fuse
opens repeatedly, do not keep on replacing it.
The cause of the overload must be found. On no
account should fuses be patched up with tin foil
or wire as this may cause serious damage
elsewhere in the electrical circuit or cause fire.
● For continued protection against risk of fire,
replace only with same type and ratings of fuse
in cigarette lighter connecting plug.
250 V, 10 A, DC
(1) Open the cable storage and plug the 12 V DC adapter
into the socket.
Bump
Socket for plugging
in the 12 V DC
adapter
Notch of connector plug
CAUTION
When not using the tool, remove the battery and
the 12 V DC adapter.
(2) Completely unwind the 12 V DC adapter and plug it
into a suitable 12 Volt cigarette lighter socket in your
vehicle.
NOTE
○ When using the 12 V DC adapter, remove the battery.
Otherwise, the product may not operate.
○ The tool cannot be used with a 24 V in-vehicle power
supply.
1
3
Flap
2
12 V DC adapter
Fig. 8
