Idiomas disponibles
Idiomas disponibles
English
A: attach to the air outlet for inflation (bayonet closure:
align; plug in and turn anti-clockwise) or...
Connection for inflating with the High-
Volume hose (air outlet)
B: for deflation attach to the air inlet (bayonet closure:
align, plug in and turn anti-clockwise)
Connection for deflating
with the High-Volume
hose (air inlet)
High-Volume hose
(2) If required, from the high-volume hose remove the
adapter and screw on a suitable adapter from the
storage.
Large High Volume
Adapter
High-Volume
hose
16
High-Volume
hose
Fig. 11
Fig. 12
High Volume
Tapered Adapter
Fig. 13
(3) Attach the high-volume hose to the object to be
inflated using the adapter.
(4) Switching on the tool: Press the power button. The
display is on.
Power button
Mode button
(5) Select High-Volume mode by pressing mode button.
WARNING
Do not excessively inflate the object to be
inflated. It may otherwise burst and cause
injuries and property damage.
(6) Starting the inflation process: Press the start/stop
button. By pressing the start/stop button the inflation
process can be stopped at any time.
(7) Remove the high-volume hose from the object to be
inflated and close its closure.
(8) Switching off the tool: Press the power button. The
display goes off.
(9) Remove the high-volume hose from the air inlet or air
outlet (bayonet closure: turn in clockwise direction
and pull off). Then insert into the socket on the
underside of the tool, wind it up at the tool and clip it
in place.
Socket
Display
Start/stop button
Fig. 14
High-Volume hose
Fig. 15
