FLAEM Aspira 11 Manual De Instrucciones página 20

APPLIANCE AND MATERIAL INFORMATION (DEPENDING ON THE MODELS SUPPLIED)
Nomenclature
1) ASPIRATOR
2) SWITCH
3) VACUUM GAUGE
4) VACUUM ADJUSTMENT KNOB
5) AIR INLET
6a) CONNECTION PIPE - Ø 13 x 7.5 mm L 1300 mm
6b) CONNECTION PIPE - Ø 13 x 7.5 mm L 280 mm
6c) CONNECTION PIPE - Ø 13 x 7.5 mm L 280 mm Single-patient multiple use
6d) CONNECTION HOSE - Ø 13 x 7.5 mm L 280 mm L 2000 mm (Single use)
7) HYDROPHOBIAL ANTIVIRAL/ ANTIBACTERIAL FILTER (SINGLE USE) (device not manufactured by FLAEM)
8) COLLECTION VESSEL
10) PROTECTIVE DEVICE
11) VESSEL CLOSURE CAP
12) VESSEL "VACUUM" SOCKET
13) VESSEL "PATIENT" SOCKET
14) LID PROTECTION CAPS
9) COLLECTION VESSEL
10) PROTECTIVE DEVICE
11) VESSEL CLOSURE CAP
12) VESSEL "VACUUM" SOCKET
13) VESSEL "PATIENT" SOCKET
14) LID PROTECTION CAPS
15) MANUAL ASPIRATED FLOW CONTROL - (disposable) (device not manufactured by FLAEM)
16) ASPIRATOR CANNULA. (NOT SUPPLIED WITH THE DEVICE). The cannula is not supplied and is
not available as a spare part for the medical device. Any cannulae to be used with our aspirators
must be of a shape adaptable to the 'MANUAL ASPIRATED FLOW CONTROL' connection supplied
with the aspirator.
17) POWER SUPPLY CABLE
17a) PROTECTION SEAL
IMPORTANT NOTE: There is an identification label on the packaging, remove it and affix it in the spaces provided on page 2. When
replacing the Nebuliser and accessories, perform the same procedure.
Model
P1211EM/11l
P1211EM/13.5l
P1211EM/20l
A005
A007
A009
ASP-4
ASP-2
20
Information on
materials
Silicone
Silicone
PVC
Polycarbonate
Polypropylene+
Silicone
Polypropylene + ther-
moplastic elastomers
Polycarbonate
Polypropylene+
Silicone
Polypropylene + ther-
moplastic elastomers