Idiomas disponibles
Idiomas disponibles
► Insert the bow to fix the bayonet style
connector.
► Screw the union nut down as far as
stop and tighten by hand.
The bayonet style connector and bow
are fixed.
To mount the brush rollers,
► Align the flat surfaces of the brush
rollers and the shaft.
► Slide the brush rollers onto the shaft.
Connecting the Rotating Roller
Brush
To connect the rotating roller brush,
F:
► Push the rotating roller brush as far
as it will go into the spray attachment.
► Once inserted, turn the rotating roller
brush clockwise until it engages.
► If the rotating roller brush is difficult to
insert into the spray attachment,
apply a food-safe fitting grease to the
sealing surface on the spray attach‐
ment.
To remove the rotating roller brush:
► Press the rotating roller brush against
the spray attachment.
► Turn the rotating roller brush counter‐
clockwise and pull out of the spray
attachment.
Using the Rotating Roller Brush
The rotating roller brush is designed for
two-handed operation.
► Depending on the application, choose
the appropriate brush rollers to ach‐
ieve optimum cleaning performance,
G
– Hard brush rollers (1) to remove
dirt from surfaces resistant to
scratches, e.g. wood deck, tiles or
facades.
– Soft brush rollers (2) to remove dirt
from potentially sensitive surfaces,
0457-367-0067-A. VA1.L23.
To clean horizontal surfaces,
► Attach the rotating roller brush to the
spray lance.
E:
► Move the rotating roller brush evenly
over the surface with light pressure.
To maintain proper control, always hold
the rotating roller brush at the spray
lance while cleaning.
Keep the rotating roller brush in motion
whenever the spray gun trigger is activa‐
ted.
To increase the cleaning performance,
the roller brush can also be mounted the
other way round (rotated by 180°). The
brush rollers then rotate in the other
direction.
To clean vertical surfaces,
► Attach the rotating roller brush to the
spray gun, without the spray lance.
► Move the rotating roller brush evenly
over the surface with light pressure.
To maintain proper control, always hold
the rotating roller brush at the spray gun
while cleaning.
Keep the rotating roller brush in motion
whenever the spray gun trigger is activa‐
ted.
When working above shoulder height,
mount the roller brush the other way
round (rotated by 180°). The brush roll‐
ers then rotate in the other direction and
make the work easier.
Preparing for Transportation or
Storage
To prepare the rotating roller brush for
transportation or storage:
► Disconnect the spray attachment and
let the rest of the water run out of the
rotating roller brush.
► Clean the rotating roller brush.
e.g. solar panels, windows or pain‐
ted and plastic surfaces (acces‐
sory).
H:
H:
7
