General features
Speaker Setting
Fine-tuning so that the System Q value is optimal
when setting the speaker type.
1
Enter Standby
Press the [POWER] button.
Select the "STANDBY" display.
2
Enter Speaker Setting mode
Press the [VOL] knob.
3
Select the Speaker type
Turn the [VOL] knob.
Each time you turn the knob, the setting alternates
between the settings shown in the table below.
Speaker type
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
4
Exit Speaker Setting mode
Press the [VOL] knob.
Switching Display
Changing the information displayed.
1
Enter Switching Display mode
Press the Control knob for at least 1 second.
"DISP SEL" is displayed.
2
Select the Display item
Push the Control knob towards [4] or [¢].
In Tuner source
Information
Frequency
Clock
In CD & External disc source
Information
Disc title
Track title
Track number & Play time
Clock
|
8
DNR-1000U
Display
"SP OFF"
"SP 5/4"
"SP 6*9/6"
"SP OEM"
Display
"FREQ"
"CLOCK"
Display
"D-TITLE"
"T-TITLE"
"P-TIME"
"CLOCK"
In Audio file source
Information
Song title & Artist name
Album name & Artist name
Folder name
File name
Track number & Play time
Clock
In HD Radio source
Information
Station name
Song title/ Artist name/
Album name/ Genre
Frequency
Clock
In Satellite radio source
Information
Channel name
Song title
Artist name
Composer name
Category name
Label name
Comment
Band & Channel number
Clock
In Standby/ Auxiliary input source
Information
Source name
Clock
3
Exit Switching Display mode
Press the Control knob.
⁄
• If the selected display item does not have any
information, alternative information is displayed.
• When you select the clock display, the display setting of
each source will be changed to the clock display.
• Album name cannot be displayed in WMA file.
Display
"TITLE"
"ALBUM"
"FOLDER"
"FILE"
"P-TIME"
"CLOCK"
Display
"ST NAME"
"TITLE"
"FREQ"
"CLOCK"
Display
"CH NAME"
"SONG"
"ARTIST"
"COMPOSER"
"CATEGORY"
"LABEL"
"COMMENT"
"CH NUM"
"CLOCK"
Display
"SRC NAME"
"CLOCK"