Protect from rain and
dampness.
Use and store only
indoors in dry locations.
Operate the charger at ambient
–
temperatures between + 5°C and
+ 40°C.
Allow the charger to cool down
–
normally – do not cover it.
Never bridge (short circuit) the
–
contacts of the charger with metallic
objects (e.g. nails, coins, jewelry).
The charger may be damaged by a
short circuit.
In the event of smoke or fire in the
–
charger, disconnect it from the wall
outlet immediately.
To reduce the risk of electric shock
–
or short circuit, do not insert any
objects in the charger's cooling
slots.
Do not operate on an easily
–
combustible surface (e.g. paper,
textiles) or in an easily combustible
environment – risk of fire.
Do not operate in a hazardous
–
location, i.e. in a location where
there are combustible liquids
(fumes), vapors or dusts. Chargers
can produce sparks, which may
ignite the dust or vapors – risk of
explosion.
FSA 65, FSA 85
Check the charger's
power cord regularly for
damage. If the power
supply cord is damaged,
immediately disconnect
the plug from the wall
outlet to avoid the risk of
electric shock.
Never jerk the power cord to
–
disconnect it from the wall outlet. To
unplug, grasp the plug, not the cord.
Have a damaged power cord
repaired by a qualified electrician.
Do not use the connecting cord for
–
any other purpose, e.g. for carrying
or hanging up the charger.
Never use connecting cords that do
–
not comply with regulations.
Position and mark the power supply
–
cord so that it cannot be damaged
or stepped on, tripped over or
endanger others.
To reduce the risk of electric shock:
Always connect the power cord to a
–
properly installed wall outlet.
Make sure the insulation of the
–
power cord and plug is in good
condition.
Unplug the power supply cord from the
wall outlet when the charger is not in
use.
Clothing and Equipment
Wear proper protective clothing and
equipment.
Clothing must be sturdy
but allow complete free-
dom of movement. Wear
snug-fitting clothing, an
overall and jacket combi-
nation, do not wear a
work coat.
Avoid clothing that could get caught on
branches or brush or moving parts of the
machine. Do not wear a scarf, necktie or
jewelry. Tie up and confine long hair
(e.g. with a hair net, cap, hard hat, etc.).
Wear sturdy shoes with
non-slip soles.
To reduce the risk of
injury from thrown
objects, always wear a
face shield and safety
glasses.
A face shield alone does not provide
adequate eye protection.
Wear heavy-duty gloves.
STIHL offers a comprehensive range of
personal protective clothing and
equipment.
Transporting the Unit
Always switch off the power tool, move
the retaining latch to ƒ and remove the
battery – even when you carry the
English
33