Using The Unit; Approved Combinations Of Cutting Attachment And Deflector - Stihl FSA 65 Manual De Instrucciones

Using the Unit

Mowing
Hold the unit with both hands – one
N
hand on the control handle – one
hand on the loop handle.
Stand upright – hold the power tool
N
in a relaxed position.
Make sure the cutting attachment is
N
not touching the ground or any other
objects.
Swing the trimmer back and forth in
N
an arc.
The cutting height is determined by
N
the distance of the mowing line from
the lawn surface.
Avoid contact with fences, walls,
N
rocks, etc. since it will result in a
higher rate of wear.
FSA 65, FSA 85
Working with bump guard
The bump guard comes standard with
the FSA 85. It is available as a special
accessory for the FSA 65.
1
The bump guard (1)
Limits the cutting range of the
–
mowing line
reduces the risk of the rotating
–
mowing line causing damage (e.g.
tree bark)
WARNING
The mowing head may continue to
rotate briefly after you switch off your
power tool – wait for the mowing head to
come to a standstill before adjusting the
bump guard – do not adjust it with your
foot.
Disposal
Do not throw cuttings into the
N
garbage can – they can be
composted.
Approved Combinations of
Cutting Attachment and
Deflector
Cutting attachment
The trimmer comes from the factory with
the AutoCut C 4-2 mowing head already
fitted. For safety reasons no other
cutting attachments may be mounted to
the trimmer.
Deflector
The trimmer is supplied with a deflector.
Only this deflector may be mounted to
the trimmer – no other deflectors are
permitted. For further information see
"Mounting the Deflector".
English
37