Gaggenau CM 210 Manual De Instrucciones página 7

m CAUTION
This appliance is designed for domestic use and for processing normal quantities of food and
not for industrial use. Any servicing other than cleaning and user maintenance should be
performed by an authorized service representative.
Do not immerse base in water or try to disassemble.
To reduce the risk of fire or electric shock, do not open the enclosure. Repair should
be done by authorized service personnel only.
Check voltage to be sure that the voltage indicated on the name plate agrees with
your voltage.
Do not use the inner compartment for storing heavy parts and do not load.
To prevent fingers or hands from being pinched or crushed, carefully push back the
inner compartment into the appliance.
Never use warm or hot water to fill the water container! Use cold water only.
Keep your hands and the cord away from hot parts of the appliance during operation.
Never clean with scouring powders or hard implements.
Never use a steam cleaner.
Carefully read the operating instructions and save these instructions.
Do not touch the grinder!
Do not allow persons (also children) with restricted physical sensory perception or
mental abilities or with lack of experience and knowledge to operate the appliance
unless they are supervised or have been instructed in the use of the appliance by
somebody who is responsible for their safety.
A short power supply cord is provided to reduce the risk resulting from becoming entangled
in or tripping over a longer cord.
Extension cords are available and may be used if care is exercised in their use. If an extension
cord is used,
1. the marked electrical rating of the extension cord should be at least as great as the
electrical rating of the appliance, and
2. the longer cord should be arranged so that it will not drape over the counter of
a table top where it could be pulled on by children or tripped over unintentionally.
This appliance has a polarized plug (one prong is wider than the other). As a safety feature,
this plug will fit into a polarized outlet only one way. If the plug does not fill fully into the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in
any way.
7