Gaggenau CM 210 Manual De Instrucciones página 31

Filter
no/old
UNIT
CALCIF.
EMPTy
trays
descaler turn on
in tank water
unit de-
scaling
turn on
coffee
unit de-
scaling
EMPTy
trays
ADD
WAter
The descaling program starts in FILTER NO/0Ld
programing mode only.
Never descale the appliance while the filter is inserted.
While the descaling program is running – approx.
35 minutes – processes and instructions are indicated on
COFFEE
display. The specified times may differ.
Start descaling program
or
lid
Note: The appliance is automatically descaled. Descaling
solution flows at intervals into the receptacle. Wait for the
next message on display (approx. 10 minutes).
Note: The appliance is automatically descaled.
Descaling solution flows at intervals into the tray 23.
Wait for the next message on display (approx.
10 minutes).
The illuminated ring on the m descaling
button flashes while the descaling program is
running.
Hold down the m descaling button for at least
3 seconds.
Empty and re-insert tray 23 and coffee dreg tray 21.
Fill the water tank with water and add descaling
agent
add 0.5 qt. of ready-prepared descaling mixture.
Place a large receptacle under nozzle.
Set function selector to 0 position.
Set function selector to ) position.
Empty and re-insert tray 23 and coffee dreg tray 21.
Rinse out the water tank, fill with fresh water up to
max and re-insert.
Empty the receptacle and place back under the
nozzle.
CAUTION
31