Temperature; Current Time; Timer - Gaggenau CM 210 Manual De Instrucciones

Temperature

Temp
normal
Temp
high
Temp
maximum

Current time

Time
--:--
Time
14:39

Timer

ON AT
--:--
ON at
07:45
The coffee temperature can be set with this function.
Hold down button q on display for at least
3 seconds.
Select TEmP. with r or s.
Press button q until the display flashes.
Change the setting with r or s.
Press button q to save the setting.
Press the o button. Back to standby.
The current time is programmed with this function.
This is required when using the timer function. The time is
displayed in 24h mode.
Hold down button q on display for at least
3 seconds.
Select TIME with r or s.
Press button q – hours display flashes.
Change the setting with r or s.
Press button q – minutes display flashes.
Change the setting with r or s.
Press button q to save the setting.
Press the o button. Back to standby.
The set time will be deleted
– if the main plug is disconnected,
– if the appliance is switched off with the power
switch 1,
– if there is a power failure.
The current time must be set again.
This function is used to set the time at which the appliance
automatically switches on.
Hold down button q on display for at least
3 seconds.
Select 0N at with r or s.
Press button q, hours display flashes.
Change the setting with r or s.
Press button q, minutes display flashes.
Change the setting with r or s.
Press button q to save the setting.
Press the o button. Back to standby.
23