Makita 4101RH Manual De Instrucciones página 7

ASSEMBLY
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before carrying out any work on the
tool.
Installing or removing diamond wheel
1
003528
Hold the outer flange with the wrench and loosen the
hex socket head bolt clockwise with the hex wrench.
Then remove the hex socket head bolt and outer flange.
Install the diamond wheel, outer flange and hex socket
head bolt onto the spindle. Hold the outer flange with the
wrench and tighten the hex socket head bolt
counterclockwise with the hex wrench. BE SURE TO
TIGHTEN THE HEX SOCKET HEAD BOLT SECURELY.
1 2
003529
CAUTION:
Use only the Makita wrench to install or remove the
•
wheel.
1. Wrench 22
2. Hex wrench
2
1. Inner flange
3 4
2. Diamond wheel
3. Outer flange
4. Hex socket head
bolt
Pressure regulator assembly
Use the pressure regulator assembly to connect to water
source. It consists of the following parts.
Part name
Pressure regulator
Adaptor
Vinyl tube
Water pipe
003534
Assemble the above parts hand tight as follows.
1
2
003535
1. Cut the vinyl tube at an angle for easier insertion. Push
the end of the vinyl tube into the end of the adapter
using a combination pushing and twisting motion.
2. Screw the pressure regulator tight on a the adaptor.
3. Connect the vinyl tube firmly to the water pipe.
Installing water pipe
1
2
003536
First, unplug the tool. Loosen the wing bolt on the depth
guide and move the base down. Install the water pipe on
the blade case using the screw.
Screw the pressure regulator tight on a faucet.
Adjust the amount of water flow by simply adjusting the
water cock.
7
Description
Preset at about 15 psi.
3/4" female hose thread
(inlet) x 3/4" male hose
thread (outlet).
Flow capacity: Maximum
390 GPH, minimum 10 GPH.
Inlet pressures: Maximum
100 psi, minimum 25 psi.
For connecting 1/4" vinyl
tube to a faucet
3/4" swivel x 1/4" adaptor.
1/4" in outer diameter x 11/64" in inner
diameter x 16-1/2 ft (5m) in length.
For adjusting the amount of
water flow.
1. Pressure
regulator
assembly
3
2. Pressure
regulator
4 3. Adapter
4. Vinyl tube
5. Water pipe
5
1. Wing bolt
2. Blade case
3. Water pipe
3