Meanings Of Symbols - Hitachi Koki CG 36DL Instrucciones De Manejo

MEANINGS OF SYMBOLS

Symbols
WARNING
The following show symbols used for the machine. Be sure that you understand their meaning before
use.
Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock,
fi re and/or serious injury.
Always wear eye protection.
Always wear hearing protection.
Do not expose to moisture.
Keep bystanders away.
Remove battery before adjusting or
cleaning and before leaving the machine
unattended for any period.
Only for EU countries
Do not dispose of electric tools together
with household waste material!
In observance of European Directive
2002/96/EC on waste electrical
and electronic equipment and its
implementation in accordance with
national law, electric tools that have
reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling
facility.
It is important that you read, fully
understand and observe the following
safety precautions and warnings.
Careless or improper use of the unit may
cause serious or fatal injury.
(Original instructions)
Max
8,000 min
Read, understand and follow all
warnings and instructions in this manual
and on the unit.
Always wear eye, head and ear
protectors when using this unit.
Keep all children, bystanders and
helpers 15 m away from the unit. If
anyone approaches you, stop the unit
and cutting attachment immediately.
Be careful of thrown objects.
Shows maximum shaft speed. Do not
use the cutting attachment whose max
-1
rpm is below the shaft rpm.
Gloves should be worn when necessary,
e.g., when assembling cutting
equipment.
Use anti-slip and sturdy footwear.
Blade thrust may occur when the
spinning blade contacts a solid object in
the critical area. A dangerous reaction
may occur causing the entire unit and
operator to be thrust violently. This
reaction is called blade thrust. As a
result, the operator may lose control
of the unit which may cause serious or
fatal injury. Blade thrust is more likely to
occur in areas where it is diffi cult to see
the material to be cut.
English
11