Idiomas disponibles
Idiomas disponibles
ge.com
The oven doors must be closed and all controls set correctly for the cycle to work properly.
@
DDD%D
%DD D
DDD D
%DD D
How to Delag the Start of Cleaning
[-_ Touch the SELFCLEAN HI/LO pad
once for a 5-hour clean time or
twice for a 3-hour clean time.
A 3-hour self-cleon time is
recommended for use when cleaning
small, contained spills.A self-cleon
time of 5 hours is recommended
for a dirtier oven.
F#q
If a time other than 5 hours or
3 hours is needed, use the number
pods and enter the desired cleon time.
You con change the cleon time to
ang time between 3 hours and 5 hours,
depending on how dirty your oven is.
[-_
Touch the DELAVSTART pad.
[]
Using the number pads, enter
the time of day you want the clean
cycle to start.
[_]
Touch the STARTpad.
The upper and lower oven doors lock
automatically. The displag will show
the start time. It will not be possible to open
the oven doors until the temperature drops
below the lock temperature and LOCKED
goes off in the control display.
When LOCKEDgoes off, you will be able
to open the doors.
After a Clean Cycle
You mag notice some white ash
in the oven. Wipe it up with a damp cloth
offer the oven cools.
If white spots remain, remove them
with a soap-filled steel wool pad and rinse
thoroughl_l with a vinegar and water
mixture.
These deposits ore usually a salt residue
that cannot be removed by the cleon cycle.
If the oven is not cleon offer one cleon
cgcle, repeat the cgcle.
You cannot set the oven for cooking
or another self-cleon cycle until the oven
is cool enough for the door to unlock.
While the oven is self-cleaning, gou con
touch the CLOCKpod to displag the time
of day. To return to the cleon countdown,
touch the SELFCLEAN HI/LO pod.
If the rocks become hard to slide,
apply a small amount of cooking oil
to a paper towel and wipe the edges
of the oven rocks with the paper towel.
21
