Idiomas disponibles
Idiomas disponibles
90° accuracy of the vertical line
(fig. V)
Place the device in the corner of a room with
■
side lengths of 3.2m and 4.2m.
Switch on all vertical lines.
■
Measure exactly 4 m from the plumb point of
■
the device alongside the vertical laser line and
mark point A on the floor.
Measure exactly 3 m from the plumb point of
■
the device alongside the second vertical laser
line and mark point B on the floor.
Measure distance C between A and B, it should
■
be exactly 5 m.
Expected accuracy ±0.8 mm.
Application examples
Levelling, transferring benchmarks/
datums
Level the laser to the required height.
Mark the points on the laser line or project the
height difference between laser beam and the
required height using a metre rule.
Maintenance / care
Do not use aggressive cleaning agents or solvents.
Clean the laser windows with a soft cloth.
In the unlikely event of a failure or defect, have the
appliance examined and repaired by an authorised
customer service workshop for Würth power tools.
With any enquiries or spare parts orders, always
quote the 10 digit item number as given on the
device type plate.
Environmental instructions
Do not dispose of this device with
household waste. Dispose of the
device via an approved waste
disposal company or via your local
authority waste disposal facility.
Observe the currently valid regula-
tions. In case of doubt, contact your
waste disposal facility. Dispose of all packaging
material in an environmentally compatible manner.
Battery packs/batteries:
Do not dispose of batteries in household waste,
do not expose to fire or water. Collect and recy-
cle batteries or dispose of with due care for the
environment.
Warranty
We provide a warranty for this Würth device from
the date of purchase and in accordance with the
legal/country-specific regulations (proof of purchase
through invoice or delivery note). Damage that has
occurred will be corrected either by replacement or
by repair. Damage caused by improper handling is
not covered by the warranty. Claims under warranty
can only be accepted if the device is returned fully
assembled to a Würth agency, your Würth sales
representative or an authorised Würth customer ser-
vice workshop. Subject to technical changes without
prior notice.
We accept no liability for printing errors.
Spare parts
If in spite of careful manufacturing and test proce-
dures, the device becomes faulty, a repair by Würth
masterService should be arranged.
With any enquiries or spare parts orders, always
quote the item number as given on the device type
plate. The latest spare parts list for the device is
available online at http://www.wuerth.com/parts-
manager. Alternatively, contact your local Würth
agency for a hardcopy.
15
