Idiomas disponibles
Idiomas disponibles
Connect the Squeegee
Assembly
For Safety: Before leaving or
servicing machine, stop on level
surface, turn off machine, remove
key and set parking brake if
equipped.
Connect the Squeegee Assembly
1. Park the machine on a level
ground and turn off all power.
2. Raise the squeegee bracket
(as shown in the figure below).
3. Install the squeegee
assembly on the squeegee
mounting bracket (as shown in the
figure below). Be sure to put the
tightening knob completely into the
slot before tightening the knob.
Tennant T260 (10- 2023)
4. Connect the suction pipe to
the squeegee assembly. As shown
in the figure (as shown in the figure
below).
Install Brush Plate
For safety: Before installing
the brush plate or pad holder,
please park the machine on a level
ground, turn off all power switches
and remove the key.
1.Park the machine on a level
ground and turn off the power.
2.Step down the pedal of the
brush plate motor and move it to
the right (as shown by the arrow)
to raise the brush plate motor (as
shown in the figure below).
English
11
