Overload Reset Switch; Timer; Water Tank Drainage; Discharge Recovery Tank - Tennant T260 Manual Del Operador

Battery Meter
The battery meter shows the
power of the battery. When the
battery is fully charged, all indicator
lights are on. As the power is
consumed, the indicator lights will
turn off from right to left(as shown
in the figure below)
Note: In order to extend the life
of the battery, please be sure to
charge the battery in time after the
machine is used.
The power is divided into 7
grids, all of which are green, and
decrease as the power decreases.
When the battery is completely
out of power, it will prompt A03
warning. Please push the machine
to the charging area to charge the
machine immediately.
Charging Power Display

Overload Reset Switch

The machine is equipped with
a resettable overload reset switch
to avoid damage to the brush plate
motor. The overload reset switch
is shown in the figure (as shown
below).
When the overload reset
switch triggers a power trip, please
determine the cause of the power
trip and let the motor cool down,
and then manually press the
overload reset switch button.
If the machine needs to be
repaired, please contact an
authorized service center.
Tennant T260 (10- 2023)

Timer

The timer will record the total
number of hours that the brush
plate motor is turned on. Please
use the timer to determine when
the recommended maintenance
procedures should be performed
and record the maintenance history
(as shown in the figure below).
Indicates the total hours

Water tank drainage

The recovery tank should be
drained and cleaned after each
use.
For safety: Before leaving or
repairing the machine, park the
machine on a level ground, and
then turn off the power switch of the
machine.

Discharge Recovery Tank

1. Transport the machine to the
drainage location and turn off the
power.
English
15