Idiomas disponibles
Idiomas disponibles
English
Move the Machine
FOR SAFETY: When loading/
unloading machine onto/off truck
or trailer, use a ramp that can
support the machine weight and
operator.
FOR SAFETY: Do not operate the
machine on a ramp incline that
exceeds a 21% grade level.
When using a truck or trailer
to move the machine, be sure
to follow the following strapping
procedures:
1.Raise the squeegee and
brush head.
2.Use the recommended
loading dock to load the machine.
3.Place the front of the machine
close to the front of the truck
or trailer. After the machine is
stable, lower the brush head and
squeegee.
4.place an obstacle behind each
drive wheel to prevent the machine
from sliding.
5.Use ropes to secure the top
of the machine to prevent tipping.
Brackets must be installed on the
deck of the truck or trailer.
For safety: When moving
the machine, please use the
recommended loading dock
to load and unload by truck or
trailer. Use ropes to secure the
machine to the truck or trailer.
Store the Machine
1.Charge the battery before
storing. Do not store when the
battery is exhausted. If the storage
period is long, please make sure
to charge the battery every 2-3
months to avoid long-term damage
24
to the battery.
2.Drain the water in the water
tank and rinse thoroughly.
3.Store the machine in a dry
place, and the squeegee and brush
plate should be kept in the raised
position.
4.Open the recovery tank cover
to facilitate ventilation.
Note: Do not expose the machine
to rain, it should be stored indoors.
5.If storing the machine at
freezing temperature, follow the
antifreeze instructions below.
Antifreeze
Pour all 1 gallon (4 liters) of
antifreeze into the solution tank
without diluting it.
For safety: Avoid contact
of antifreeze with eyes. Wear
protective glasses.
Important: Before operating the
machine, rinse the antifreeze in the
solution tank.
Tennant T260 (10- 2023)
