Ambu aView 2 Advance Instrucciones De Uso página 15

• The hook on the power supply bracket can be used for storing visualization devices in
pouches. In addition, the power adapter cable can be rolled up on the power supply bracket
to improve cable management.
Place the displaying unit in the bracket: Cc
• Fold the stand upwards against the upper edge of the displaying unit.
• Place the lower edge of the displaying unit in the bracket. The stand must be
oriented upwards.
• Push the displaying unit backward until the lock engages, and a click is heard. The hooks on
the bracket must engage with the holes on the back of the displaying unit.
• Ensure that the displaying unit is securely placed in the bracket before letting go with
your hands.
Remove the displaying unit from the bracket: K
• Use both hands to hold the displaying unit while pressing the two grey release buttons on
the bracket behind the displaying unit.
• Pull the displaying unit towards yourself.
4.5. Battery and power
The displaying unit's remaining battery power is shown by the colour of the power button and
the battery icon in the Toolbar. For information about power supply, see section 2.3.
Power button light
indicator
Green
Orange
Blinking orange
*
Also when powered OFF.
*
5. Network setup
Always use a secure network when handling images and patient data. See technical details
about the configuration of LAN and Wi-Fi in Appendix 3. Cybersecurity.
5.1. Wi-Fi and LAN/Ethernet setup
Importing a Worklist or transferring imagery requires that the displaying unit is connected to the
network via Wi-Fi or LAN/Ethernet cable. The displaying unit supports WPA, WPA2 and WPA2
Enterprise authentication. Wi-Fi networks that redirect to a login webpage are not supported.
5.1.1. Set up the displaying unit for Wi-Fi connection:
• Press the Settings tab, then press Setup 1 .
• Press Network setup 2 .
• Press the ON/OFF slider to turn on Wi-Fi 3 (switch to green).
• If required by your organization's Wi-Fi network, press the input field
next to Hostname 4 and enter the hostname.
Note: The hostname is provided by your organization's IT administrator and is
used for identifying the displaying unit on the Wi-Fi network. The hostname can
be 1-63 characters long excl. dots and can consist of numbers and upper- or
lowercase letters (A-Z/a-z). Hyphens cannot be used as first or last character.
• Press Configure 5 and wait while
the displaying unit searches for
available networks.
Note: If a Wi-Fi network has been
set up previously, press Configure
a new network.
Battery icon in
Toolbar
Green
Orange
Red
Remaining battery
power
> 40 %
< 40 %
< 20 %
5
2
Action required
before use
-
Charge
Charge
1
3
4
15