Operation; Switching On And Off; Setting The Penetration Depth Of The Engraving; Changing The Engraving Tip - Parkside PAGG 4 A1 Traduccion Del Manual De Instrucciones Originale

Operation

Never use the appliance for purposes other than those for which it was
designed and only with original parts/accessories . Using attachments
or accessory tools other than those recommended in the operating
instructions can lead to a risk of injury .

Switching on and off

Switching on:
♦ Press and hold the ON/OFF switch
Switching off:
♦ Let go of the ON/OFF switch

Setting the penetration depth of the engraving

Use the +/– speed control buttons
of the engraving . A low setting is usually sufficient for the most com-
mon applications .
♦ Press the + speed control button
depth .
♦ Press the – speed control button
depth .

Changing the engraving tip

CAUTION! RISK OF INJURY!
► Always switch the appliance off before carrying out any work on it .
♦ Change the engraving tip
and no longer delivers the desired engraving results . Turn the
engraving tip lock
the engraving tip
PAGG 4 A1
.
to set the penetration depth
to increase the penetration
to decrease the penetration
as soon as it becomes worn
anticlockwise (in working direction) until
can be removed .
.
GB │ MT │ 85 ■