Olimpia splendid 9K-12K Instrucciones Para El Uso Y El Mantenimiento página 13

REMOTE CONTROL
MUTE function
MUTE
MUTE
1. Press
button to active this function,
and will appears on the remote display.
Do it again to deactivate this function.
2. When the MUTE function runs, the remote
controller will display the auto fan speed, and
the indoor unit will operate at lowest fan
speed to be quiet feeling.
3. When press FAN/ TURBO/ SLEEP button, the
MUTE function will be cancel. MUTE function
can not be activated under dry mode.
SLEEP function
Pre-setting automatic operating
SLEEP
program.
SLEEP
Press button to activate the SLEEP
function, and appears on the display.
Press again to cancel this function.
After 10 hours running in sleep mode, the air
conditioner will change to the previous setting
mode.
I FEEL function
I FEEL
I FEEL
Press button to active the function, the
will appear on the remote display.
Do it again to deactivate this function.
This function enables the remote control to
measure the temperature at its current location,
and send this signal to the air conditioner to
optimize the temperature around you and ensure
the comfort.
It will automatically deactivate 2 hours later.
ECO function
In this mode the appliance
ECO
automatically sets the operation to
save energy.
Press the ECO button, the
display, and the appliance will run in ECO mode.
Press again to cancel it.
Note: The ECO function is available in both
COOLING and HEATING modes.
DISPLAY function (Indoor display)
Switch ON/OFF the LED display on
DISPLAY
panel.
DISPLAY
Press button to switch off the LED
display on the panel. Press again to switch on the
LED display.
11
appears on the