SOMFY PERGOLA io LOUVER CONTROL Manual De Instrucciones página 3

Idiomas disponibles

Pergola io LOUVER CONTROL

1.PRIOR INFORMATION

1.1.Field of application

The PERGOLA io LOUVER CONTROL is an independent mounted control equipped with io-homecontrol

which is used to control wired drives for pergolas with oriented slates, from an io-homecontrol control point

It is only compatible with 24 V DC drives.

1.2.Liability

These instructions must be kept by the user. Failure to follow these instructions or use

of the product outside its field of application is forbidden and will invalidate the

warranty and discharge Somfy of all liability.

This Somfy product must be installed by a professional drive and home automation

installer. Moreover, the installer must comply with the standards and legislation

currently in force in the country in which the product is being installed, and inform his

customers of the operating and maintenance conditions for the product.

Never begin installing without first checking the compatibility of this product with the

associated equipment and accessories. If in doubt when installing this product and/or

to obtain additional information, contact a Somfy representative or visit the website

www.somfy.com.

2.INSTALLATION

WARNING

• These instructions are mandatory for the home motorisation and automation professional installing the product.

• Cables which pass through a metal wall must be protected and insulated using a sheath or sleeve

• For outdoor use, install the product in a UV-resistant duct, for example under a cullis.

• Comply with current standards and legislation in the country of installation.

CAUTION

• Never drop, knock or puncture the drive or immerse it in liquid.

• Ensure the power is switched off during the assembly and wiring stages.

• Independently mounted control.

radio technology