EN
These instructions apply to all variations of the LTN 50 PA, which are available in the current
catalogue.
1. CONTENTS
1. PRIOR INFORMATION
1. 1. SPHERE OF APPLICATION
LTN drives are designed to power all types of roller shutters, outdoor awnings without cassette
and interior blinds.
The installer, a home motorisation and automation professional, must ensure that once the
driven product is installed, it respects the current standards in the country of installation,
notably standard EN 13659 relating to roller shutters, EN 13561 relating to outdoor screens and
awnings and EN 13120 relating to interior blinds.
1. 2. LIABILITY
Before installing and using the drive, please read these instructions carefully. In addition to
the instructions provided in this guide, please also comply with the instructions set out in the
enclosed Safety instructions document.
The drive must be installed by a home motorisation and automation professional, in accordance
with Somfy's instructions and the applicable regulations in the country of installation.
Any operation of the drive outside the sphere of application described above is prohibited.
Such operation shall exclude Somfy from all liability and invalidate the Somfy warranty,
as will any failure to comply with the instructions given herein and in the enclosed Safety
instructions document.
After installing the drive, the installer must inform his customers of the operating and maintenance
conditions for the drive and must pass the operating and maintenance instructions on to them,
as well as the enclosed Safety instructions document. Any After-Sales Service operation on
the drive requires intervention by a home motorisation and automation professional.
Should any doubt arise during installation of the drive or for additional information, consult a
Somfy contact or visit www.somfy.com.
Safety Warning!
2
ORIGINAL INSTRUCTIONS
Non contractual images
2
2
2
3
3
4
4
4
4
5
5
Warning!
Copyright © 2016 Somfy SAS. All rights reserved.
6
6
6
7
7
8
8
Information