Idiomas disponibles
Idiomas disponibles
16.2.8
Glue quantiy adjustment
16.2.9
Basic setting adjusting the workpiece feed
16.2.10 Adjustments edge overhang
16.2.11 Adjustment edge band saw (edge section)
The edge band saw unit is used to saw off the overlapping edge band at the front/head and
HOLZMANN MASCHINEN GmbH
www.holzmann-maschinen.at
The amount of glue can be adjusted with
the hand crank (2). To do this, loosen the
lock nut (1), turn the crank handle (2) to
set the desired amount of glue. Then fix
the lock nut (1) again.
With the hand wheel (1) the distance to the
conveyor belt can be adjusted
The edge overhang at the front (1) or rear
(2) can be increased or decreased with the
respective (+) / (-) keys.
The edge overhang has been preset at the
factory and a certain amount of overhang is
necessary for subsequent functions to work
properly.
OPERATION
49
KAM215all
