problemas (vide pagina 43).
The disc is inserted upside down.
Insert the disc with the printed side up.
a
(The player is in the pause mode.
Press P88 (Ill) to release pause.
Moisture condensation.
Leave the player turned on for
approximately one hour.
Play does not start and "no disc" is
displayed.
There is no disc in the unit.
=
Insert a disc.
Sound is not heard.
Loose connection.
Insert the plug firmly.
Connection is incorrect.
Check the connection refering to
"Connecting the CD Player".
the minimum.
'lis displayed when you press PP.
>> was continuously pressed at the end
the disc.
Play does not begin-from the first selection.
the unit.
The remote commander does not operate
of | Press <4 or#€< to return to normal
indication.
mode.
The remote commander is not pointed at
the remote sensor.
There is an obstacle between the remote
commander and the unit.
The batteries are run down.
Replace both batteries.
Point the remote commander at the sensor.
Remove the obstacle.
unit.
The remote commander is too far from the
Move closer.
Any operation is not possible.
The internal control program may not run.
Turn off the power and tum it on again.
|
a
40
