Invacare Softform Premier Active 2 Manual Del Usuario página 14

Softform®Premier Active 2 Mattress
2. Using a nylon brush, gently clean all crevices as they can harbor
microorganisms.
3. Air dry all treated surfaces.
Cleaning covers
(Removal of contaminants such as dust and organic matter)
1. Remove all covers for laundering.
2. Launder the covers with the recommended temperature of 80 °C
using a diluted detergent solution (Instructions on label).
!
IMPORTANT
Washing at higher temperatures may cause shrinkage.
Drying covers
1. Hang mattress covers from a line or bar and drip dry in a clean
indoor environment.
or
2. Tumble dry on a low heat setting.
!
IMPORTANT
▸ Tumble dry setting must not exceed 40 °C.
▸ Do not tumble dry for longer than 10 minutes.
▸ Dry covers thoroughly before re-fitting to the mattress.
Disinfecting covers
(Reducing the number of microorganisms)
Please contact your hygiene specialist in the event of contamination.
! IMPORTANT
Ensure that any residual detergent has been removed prior to
disinfection.
14
Light soilage
1. Wipe down the cover with a 0.1% Chlorine Solution (1,000 ppm).
2. Rinse the cover with clean water using a single use nonabrasive
cloth.
3. Dry the cover thoroughly.
Heavy soilage
Where the mattress is badly soiled, we recommend cleaning with a
dilute cleaning solution at 80 °C in the washing machine.
Large spillages of blood should be absorbed and removed with
i
paper towels first, followed by as below.
1. Clean up all spillages of bodily fluids i.e. blood, urine, faeces, spu-
tum, wound exudater and all other bodily secretions as soon as
possible using a 1% Chlorine Solution (10,000 ppm).
2. Rinse the cover with clean water using a single use nonabrasive
cloth.
!
IMPORTANT
Polyurethane coated fabrics can absorb liquids for short
periods causing a temporary change to the polyurethane
characteristics. The mattress cover swells temporarily and
is more vulnerable to physical damage for a period after it is
completely surface dried, by which time it will revert to its
previous state.
3. Dry the cover thoroughly.
!
IMPORTANT
1% Chlorine Solution used on a regular basis can diminish the
life of the cover if not rinsed and dried properly.
▸ Do not use granules.
WARNING

▸ Remove contaminated foams from use.
Maintenance